RHEL 7特性说明(二):软件包及支持变化

2014-07-14 12:42


Red Hat Enterprise Linux 7.0 是 Red Hat 的下一代操作系统完整套件,旨在用于关键任务企业级计算以及顶级企业级软件和硬件零售商认证。

淘汰的软件包

计划在 Red Hat Enterprise Linux 7.0 中淘汰下列功能和性能,并可能从该产品的未来版本中删除。在适当的情况下可采用以下建议的功能。

表 4.1. 淘汰的软件包

功能/软件包替代品迁移记录
ext2、ext3 文件系统支持 ext4 可在 ext2 和 ext3 文件系统中使用 ext4 代码
sblim-sfcb tog-pegasus  
传统 RHN 托管的注册 subscription-manager 和 Subscription Asset Manager  
acpid systemd  
evolution-mapi evolution-ews 请从 Microsoft Exchange Server 2003 机器中迁移
gtkhtml3 webkitgtk3  
用户信息 选项  
edac-utils 和 mcelog rasdaemon  
libcgroup systemd Red Hat Enterprise Linux 7.0 将继续使用 cgutils,但systemd 改进了让用户在今后的发行本中进行迁移的能力。
krb5-appl openssh OpenSSH 包含拥有类似功能的工具,并采用更活跃的维护标准和更活跃的开发和维护代码库。
lvm1 lvm2  
lvm2mirror 和 cmirror lvm2 raid1 lvm2 raid1 不支持集群,还没有计划替换 cmirror

删除的软件包

本小节列出了相比 Red Hat Enterprise Linux 6 从 Red Hat Enterprise Linux 7 中删除的软件包。

表 4.2. 删除的软件包

功能/软件包替代品迁移记录
gcj OpenJDK 不要使用 gcj 将 Java 程序编译为原代码。
使用 32 位架构作为安装架构 64 位架构 应用程序仍将使用兼容库运行。在 64 位 Red Hat Enterprise Linux 6 中测试您的程序。如果需要 32 位引导支持,请继续使用 Red Hat Enterprise Linux 6。
IBM POWER6 支持 继续使用 Red Hat Enterprise Linux 5 或者 6。
Matahari 基于 CIM 的管理 已从 Red Hat Enterprise Linux 6.4 中删除了 Matahari。不要再使用它。
ecryptfs 使用现有 LUKS 或者 dm-crypt 基于块的加密 不能进行迁移;用户需要重新生成加密的数据。
TurboGears2 网页程序栈  
OpenMotif 版本 2.2 Motif 2.3 根据现有 Motif 版本,即 Red Hat Enterprise Linux 6 中的版本重新构建应用程序。
webalizer 网页分析工具  
compiz 窗口管理程序 gnome-shell  
Eclipse 开发者工具组件 已在 Red Hat Developer Toolset 中提供 Eclipse。
Qpid 和 QMF MRG 中包含 Qpid 和 QMF。
amtu 常用标准认证不再需要这个工具。
system-config-services systemadm  
pidgin 前端 empathy  
perl-suidperl 解读程序 这个功能在 upstream perl 中已无法使用。
pam_passwdqc, pam_cracklib pam_pwquality  
HAL 库及守护进程 udev  
ConsoleKit 库及守护进程 systemd http://www.freedesktop.org/wiki/Software/systemd/writing-display-managers
DeviceKit-power upower  
system-config-lvm gnome-disk-utility 和system-storage-manager Red Hat Enterprise Linux 6 也使用 gnome-disk-utility。注:应在较简单的任务中使用 system-storage-manager,而使用 lvm2 命令进行微调或者用于与 LVM 有关的更复杂的操作。
system-config-network nm-connection-editor,nmcli Red Hat Enterprise Linux 6 也使用 nm-connection-editor
taskjuggler  
thunderbird evolution  
vconfig iproute vconfig 的所有功能都由iproute 软件包中的 ip 工具提供。详情请查看 ip-link(8) manual page。
原有图形驱动程序分类 现代硬件或者 vesa 驱动程序  
xorg-x11-twm  
xorg-x11-xdm gdm  
system-config-firewall firewall-config 和firewall-cmd system-config-firewall 仍作为用于静态环境的防火墙备选解决方案的一部分与 iptables 服务一同使用。
mod_perl mod_fcgid mod_perl 与 HTTP 2.4 不兼容
busybox  
prelink 注:Red Hat Enterprise Linux 7.0 提供 prelink,但默认为禁用。
KVM 和虚拟化软件包(在 ComputeNode 变体中) 附带变体的 KVM 和虚拟化,比如服务器变体  
module-init-tools kmod  
kernel-firmware-* linux-firmware  
flight-recorder  
wireless-tools 要在命令行中进行基本无线设备操控,请使用 iw 软件包中的 iw 二进制程序。  
libtopology hwloc  
digikam 由于相依性极为复杂,Red Hat Enterprise Linux 7.0 软件频道不再提供digiKam 图片管理程序。
NetworkManager-openswan NetworkManager-libreswan  
KDE 显示管理程序,KDM GNOME 显示管理程序,GDM GNOME 显示管理程序是 Red Hat Enterprise Linux 7.0 的默认显示管理程序。注:仍可使用 KDE(K 桌面环境),并提供支持。
virt-tar virt-tar-in 和 virt-tar-out 注:命令行语法已有变化。详情请查看手册页。
virt-list-filesytems virt-filesystems 注:命令行语法已有变化。详情请查看手册页。
virt-list-partitions virt-filesystems 注:命令行语法已有变化。详情请查看手册页。

淘汰的驱动程序和模块

图形驱动程序
xorg-x11-drv-ast、xorg-x11-drv-cirrus、xorg-x11-drv-mach64、xorg-x11-drv-mga、xorg-x11-drv-openchrome

注:上述图形驱动程序将由内核模式设置(KMS)驱动程序替换。

输入驱动程序

xorg-x11-drv-void

存储驱动程序

3w-9xxx、arcmsr、aic79xx、Emulex lpfc820

不再继续使用的内核驱动程序、模块及功能

本小节列出了相比 Red Hat Enterprise Linux 6 已从 Red Hat Enterprise Linux 7.0 中删除的驱动程序及模块列表。

存储驱动程序

megaraid_mm、cciss、aic94xx、aic7xxx、i2o、ips、megaraid_mbox、mptlan、mptfc、sym53c8xx、ecryptfs、3w-xxxx

联网驱动程序

3c59x、3c574_cs、3c589_c、3c589_cs、8390、acenic、amd8111e、at76c50x-usb、ath5k、axnet_cs、b43、b43legacy、can-dev、cassini、cdc-phonet、cxgb、de4x5、de2104x、dl2k、dmfe、e100、ems_pci、ems_usb、fealnx、fmvi18x_cs、fmvj18x_cs、forcedeth、ipw2100、ipw2200、ixgb、kvaser_pci、libertas、libertas_tf、libertas_tf_usb、mac80211_hwsim、natsemi、ne2k-pci、niu、nmckan_cs、nmclan_cs、ns83820、p54pci、p54usb、pcnet32、pcnet_32、pcnet_cs、pppol2tp、r6040、rt61pci、rt73usb、rt2400pci、rt2500pci、rt2500usb、rtl8180、rtl8187、s2io、sc92031、sis190、sis900、sja1000、sja1000_platform、smc91c92_cs、starfire、sundance、sungem、sungem_phy、sunhme、tehuti、tlan、tulip、typhoon、uli526x、vcan、via-rhine、via-velocity、vxge、winbond-840、xirc2ps_cs、xircom_cb、zd1211r

图形驱动程序
xorg-x11-drv-acecad、xorg-x11-drv-aiptek、xorg-x11-drv-elographics、xorg-x11-drv-fpit、xorg-x11-drv-hyperpen、xorg-x11-drv-mutouch、xorg-x11-drv-penmount

输入驱动程序

xorg-x11-drv-acecad、xorg-x11-drv-aiptek、xorg-x11-drv-elographics、xorg-x11-drv-fpit、xorg-x11-drv-hyperpen、xorg-x11-drv-mutouch、xorg-x11-drv-penmount

本系列文章来自 RHEL 7.0 的发行注记,完整内容请移步:https://access.redhat.com/documentation/zh-CN/Red_Hat_Enterprise_Linux/7/html/7.0_Release_Notes/index.html